Tuopuke 3x7" RK08 Rosin Caged Cube Kits With Dual Anodized Plates in Rosin Cube, Dual Heaters, Dual Temp Sensors, Temperature Control Box - Complete Setup to Pair with A Hydraulic Press | 3x7" Anodized Rosin Caged Cube Kits -600 Watts - Dual Heating Rods
3x7" Caged Heated Plates - 3.5-28g Amount Was Recommend to Press At a time; Procure A High-yield Rosin Heat Press Machine to Be Paired with 12 - 20 Ton Hydraulic Shop Press.
Easy Setup - Completed Setup Before Shipment, Move onto Hydraulic Press for plug and Play.
Food-grade Working Surface - Dual Heated Platens Made of Anodized Aluminum Guarantee to Clean Easily.
Accurate Temp Detected - 20 Amp Relay and Replacement Fuse Attached, Separated Temperatures Probes and Heating Rods Obtain Accurate Temp.
Long Working Life Guaranteed - More Than 6,000 Times Service of Heating Rods and 20 Amp Relay and Replacement Fuse Attached.
Perfect Alignment - Bottom and Top Platen Move up Evenly by Four Pillars.
Evenly Heating Up - Dual Heated Plates Heat up to Setting Temp in 5-10 Minutes by 700 Watts Heating Rods.
RK07 is Fully Assembled at the Factory. Simply Move Cube Kit to Hydraulic Shop Press and Begin Working.
Does Not Fit Some A-Frame Press, H-Frame is Recommended for Proper Clearance.
Well-packaged, without Any Marks on Thickened Plain Carton.
Support Use about Yield and Press.
1Pcs x Anodized Plates Rosin Cube
1Pcs x Rosin Control Box
Control Box Instruction Manual
1Pcs Screwdriver Tool
Temperature Range: 0-399F
Plate Size: 3" x 7"
Rosin Cube Dimensions: 3.5" x 8.6" x 5.5"
External Package: 14.2" x 13.2" x 9.4"
Total Weight: 19lbs
Recommended Rosin Filter Bag 160u
Point Piston Ram of Hydraulic Shop Press at Circle of Rosin Cube kit
Stroke Extend of The Shop Press >6"
Hydraulic Shop Press < 20 Tons
One Person Operation
Keep It out of Reach of Children
Do Not Switch on PID Temp Controller Box without Putting Rod into Aluminum Platen
Tuopuke Digital Temp Controller IsCompatible to E-Nail for Vaping
QUESTIONS & ANSWERSAsk a Question
does the temp controler only displays on fahrenheit ? can it be switched to Celsius?
The temp controller can displays only Celsius,it can not switched to fahrenheit
Is there a certain model of h-frame press that works best?
we suggest H frame press similar as dake corp 20ton